[Automotive] - Yamaha RX 135 Cylinder block and other items for sale

[mlt]Name of Product: Yamaha RX 135 Cylinder block and other items for sale[/mlt]
[mlb]
Date of Purchase: N/A
Expected Price: Mentioned against each item in details section.
Price Negotiable: Yes

Product State: Used
Condition of Product: Mentioned in details
Reason for sale: Not needed, bike has been restored fully
Accessories included: Whats in the pic.

Warranty Status: Invalid
Warranty Valid in: N/A
Past replacement history: None

Location: Gurgaon
Payment Options: NEFT, Cash
Shipping Details: As per actuals, to be paid by buyer

Up for sale are the following parts for yamaha RX 135

1) E1 and E2 blocks for RX135( 4TL 00 ). Both are stock, however for a proper rebuild, would need to run first oversize. Price - 5000 each.

2) E3 Block( 4TL 00 ) - This has been ported mildly, never used. Brand new. - 4500/-

3) Original RZ Fiber reed and flange - To go with the ported block - 1500/-

4) Replica Keihin Flatside carburettors ( TM 32 I believe ) - 3000 each

5) Crank from my RXZ 5 speed ( Note this crank is stock, what came with the bike, however the Gudgeon pin is first oversize. Never overhauled, since i got a brand new crank from abroad and installed that. Has done 30,000 kms in the bike with the old owner, still better than many other cranks ) - 1800/-

6) First oversize RXK piston with rings ( Ceramic topped ) - 600/-

7) E-1 Head ( 4TL 00 ) with a higher squish - 1000/-

Note - the Ported block, head, carburettor, reeds, flange, piston were intended as one set for a performance bike rebuild, but never came to building it actually. Lying as is. View attachment 1870 View attachment 1871 View attachment 1872 View attachment 1873 View attachment 1874 View attachment 1875 View attachment 1876 View attachment 1877 View attachment 1878 View attachment 1879 [/mlb]

 

^^ Porting was done in Mumbai by Atul. Its a mildly ported setup with no alteration to timing, only ports have been enlarged for more air-fuel to circulate. I wanted a bump in performance, not change of the power band/rev range etc etc.

 

Hi The Pain - I have received your conversation, have edited your post, since personal information like contact details/email addresses are not permitted in in-line posts. thanks!

 

Thanks for showing interest The Pain, personal contact details are not allowed to be posted for the members own safety.

You can freely exchange information using the (Private) Conversations.

Thanks.

Sent from my MB525 using Tapatalk 2

 

Bump!

 

Bumping this up, some items on hold for shanye/The Pain

 

Bump, am back in the country, to deal this out!

 

Bumping this up

 

Crank shipped to The Pain

Bump for other items.

 

Price drop!


1) E1 and E2 blocks for RX135( 4TL 00 ). Both are stock, however for a proper rebuild, would need to run first oversize. Price - 4500 each.

2) E3 Block( 4TL 00 ) - This has been ported mildly, never used. Brand new. - 4000/-

3) Original RZ Fiber reed and flange - To go with the ported block - 1000/-

4) Replica Keihin Flatside carburettors ( TM 32 I believe ) - 2800 each

5) First oversize RXK piston with rings ( Ceramic topped ) - 500/-

6) E-1 Head ( 4TL 00 ) with a higher squish - 900/-

 

Items 2,3,5 and 6 have been sold.

Bump for the others!

 

Bump for blocks and carburetors!

 

Bump!

 

Bumping this up

 

One Cylinder and Carburettor sold. Bump for the other items.

 

Did Pintu come back to deal

 

Lol, I think I gave Pintu too much Gyaan for one night! Anyhow, Block is on hold for someone, waiting for confirmation.